Castaly · Blog · Pricing & billing
Wan 3.0 Pricing: Standard or Prime, and What a Clip Costs
Wan 3.0 runs from $0.25 for 5 seconds at 480p to $5.93 for 30 seconds at 1080p, and Prime costs about 1.5 times as much. Tables for every length and resolution.
Wan 3.0 has the simplest pricing of any long-clip model in Castaly: one rate per second at each resolution, with nothing added for sound, references or the ratio. The only real decision is standard or Prime, and it applies to every second you render.
The short answer
| Resolution | wan3.0-video per second |
5 s | wan3.0-video-prime per second |
5 s |
|---|---|---|---|---|
| 480p | $0.0494 | $0.25 | $0.07514 | $0.38 |
| 720p | $0.0988 | $0.49 | $0.1547 | $0.77 |
| 1080p | $0.1976 | $0.99 | $0.3094 | $1.55 |
Prime costs 1.5 to 1.6 times as much at every resolution.
Every common length
Both models accept any whole number of seconds from 2 to 30, or Auto.
Wan 3.0
| Length | 480p | 720p | 1080p |
|---|---|---|---|
| 5 s | $0.25 | $0.49 | $0.99 |
| 10 s | $0.49 | $0.99 | $1.98 |
| 15 s | $0.74 | $1.48 | $2.96 |
| 20 s | $0.99 | $1.98 | $3.95 |
| 30 s | $1.48 | $2.96 | $5.93 |
Wan 3.0 Prime
| Length | 480p | 720p | 1080p |
|---|---|---|---|
| 5 s | $0.38 | $0.77 | $1.55 |
| 10 s | $0.75 | $1.55 | $3.09 |
| 15 s | $1.13 | $2.32 | $4.64 |
| 20 s | $1.50 | $3.09 | $6.19 |
| 30 s | $2.25 | $4.64 | $9.28 |
The final charge follows the length the provider reports for the finished clip, so treat these as the Studio's estimate for the length you request.
What does not change the price
- Generate audio. On or off, the rate stays the same.
- The ratio. 16:9, 9:16, 1:1, 4:3, 3:4 and follow reference cost the same.
- Inputs. A first frame, a last frame, reference images, videos and audio clips, a file or a web page all leave the rate unchanged.
Sound makes the most difference to the comparison with Kling. Kling 3.0 adds 50% for audio, so 5 seconds at 720p with sound costs $0.57 there against $0.49 on Wan 3.0. At 1080p, Kling is still cheaper: $0.76 against $0.99. The Kling 3.0 pricing guide has its full table.
Resolution doubles the price
Each step up on Wan 3.0 doubles the rate. That makes 480p a useful draft tier: a 5-second test costs a quarter of the 1080p clip. On Prime, 720p costs about twice 480p and 1080p costs exactly twice 720p.
For one 5-second shot at 1080p on Wan 3.0, three 480p drafts and one final come to 3 × $0.25 + $0.99 = $1.74. Four attempts at 1080p cost $3.95. The final is a new generation, so use the drafts to test the prompt, framing and timing.
Standard or Prime?
The two share every input and setting. Prime is the higher-priced model, and we have no controlled comparison showing what the extra money buys for a given shot, so judge it on your own footage.
A practical order:
- Settle the prompt on Wan 3.0 at 480p.
- Render the shot at the final resolution on Wan 3.0.
- Only if the result falls short, run the same setup on Prime and compare.
Long clips are where Wan 3.0 saves the most
Only three models in Castaly reach 30 seconds. One 30-second clip at 16:9 with audio off:
| Model | 480p | 720p | 1080p |
|---|---|---|---|
wan3.0-video |
$1.48 | $2.96 | $5.93 |
wan3.0-video-prime |
$2.25 | $4.64 | $9.28 |
seedance-2.5 |
$3.99 | $8.57 | $21.10 |
Below 15 seconds there are cheaper options: Kling 3.0 costs $0.51 and Wan 2.7 costs $0.56 for 5 seconds at 1080p. The Wan comparison sorts out the whole family.
FAQ
How much does Wan 3.0 cost per second?
$0.0494 at 480p, $0.0988 at 720p and $0.1976 at 1080p. Prime is $0.07514, $0.1547 and $0.3094.
Does Wan 3.0 charge extra for audio?
No. Generate audio does not change the rate on either model.
How much is a 30-second Wan 3.0 video?
$1.48 at 480p, $2.96 at 720p and $5.93 at 1080p. On Prime, $2.25, $4.64 and $9.28.
Do reference files cost extra?
No. Reference images, videos and audio do not change the per-second rate on Wan 3.0.